Centaglide
The Centaglide is a heavy duty heat resisting glass flowmeter for large capacity flows. Centaglide has a centre guide rod accurately guiding the rise and fall of the flow indicator float. All the tubes listed below will accept hot water and are supplied calibrated in litres/min. For flowmeters Cat. Nos. 10901 to 10909 the length is approximately 205mm. For flowmeters Cat. Nos. 10910 to 10911 the length is approximately 305mm.
| Prod Code | Centre Guide Rod | Material Float | Polypropylene End Fittings | Water Flow (litres/min) |
|---|---|---|---|---|
| 10901 | Polypropylene | PTFE | 1/4 | 0.5 to 7 |
| 10902 | Polypropylene | PTFE | 1/2 | 0.5 to 7 |
| 10903 | Polypropylene | PTFE | 1/2" Bore Hose Fitting | 0.5 to 7 |
| 10904 | Polypropylene | PTFE | 5/8" Bore Hose Fitting | 0.5 to 7 |
| 10905 | St. Steel | PTFE | 1/4 | 1 to 7.5 |
| 10906 | St. Steel | PTFE | 1/2" BSP Fitting Threaded | 1 to 7.5 |
| 10907 | St. Steel | St. Steel | 1/4" BSP Fitting Threaded | 2 to 17 |
| 10908 | St. Steel | St. Steel | 3/8" BSP Fitting Threaded | 2 to 17 |
| 10909 | St. Steel | St. Steel | 1/2" BSP Fitting Threaded | 2 to 17 |
| 10910 | St. Steel | PTFE | 1" BSP Fitting Threaded | 5 to 38 |
| 10911 | St. Steel | St. Steel | 1 1/4" BSP Fitting Threaded | 12 to 75 |